Insert flame monitor into burner insert

Type ar · emne 83.70 · version 0105 · 2004-09-17

Gælder for: MODEL 375.4 with BODY 375.840 with CODE (H61) "Webasto" Air Top 2000 hot air auxiliary heater MODEL 944 with BODY 944.899 with CODE (H61) "Webasto" Air Top 2000 hot air auxiliary heater MODEL 950, 952, 953, 954 with BODY 942.899 with CODE (H61) "Webasto" Air Top 2000 hot air auxiliary heater MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (H61) Webasto Air Top 2000 hot air auxiliary heater MODEL 950, 952, 953, 954 with BODY 940.899 with CODE (H61) "Webasto" Air Top 2000 hot air auxiliary h

Ikke tilgængelig på “da”; vises på Engelsk.

AR83.70-W-5682-01A	Insert flame monitor into burner insert
Danger!	Risk of explosion from fuel vapors, risk of poisoning from inhaling combustion gases and risk of injury from burns during and after operation of heater unit.	Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or when refueling. Allow heater unit to cool down after operation and wear protective gloves.	AS83.70-Z-0002-01A

W83.70-0650-02

1 Insert flame monitor into bore (arrow) in the burner insert (1).

W83.70-0649-02

2 Route the cable (4) for the flame monitor (1) together with the cable sleeve (3) under the fastening clip (2), onward under the fuel line (6) and under the cover panel (5).

Henviste dokumenter

as8370z000201a Fare for eksplosion på grund af brændstofdampe, fare for forgiftning ved indånding af forbrændingsgas og fare for personskade på grund af forbrændinger, under eller efter at varmesystemet har været i drift.