ar8370d5685c

Remove/install overheating sensor

Type ar · emne 83.70 · version 0103 · 2003-09-29

Gælder for: MODELS 901.06#, 902.06# /07#, 903.06# /07#, 904.06# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater B3L-C compact heater MODELS 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater D3L-C compact heater MODELS 901.66# /67#, 902.66# /67#, 903.66# /67#, 904.66# ## up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater B3L-C compact heater MODELS 901.66# /67#, 902.66# /

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.70 Parkeringsvarmesystem, ekstra varmesystem, ekstra varmeapparat — Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 06*, 36*, 46*, 66*)

EinPAS 39 Varmesystem/ventilation/køling › 39.25 Parkeringsvarme/ekstra varmesystem › 39.25.12 Sensor/kontakt/ledningssæt — Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 06*, 36*, 46*, 66*)

AR83.70-D-5685C

Remove/install overheating sensor

8.9.97

MODELS 901.06#, 902.06# /07#, 903.06# /07#, 904.06# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater
B3L-C compact heater

MODELS 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater
D3L-C compact heater

MODELS 901.66# /67#, 902.66# /67#, 903.66# /67#, 904.66# ## up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater
B3L-C compact heater

MODELS 901.66# /67#, 902.66# /67#, 903.66# /67#, 904.66# ## up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater
D3L-C compact heater

MODELS WD1##, WD2##, WD3##, WD6##, WD7## ### up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater
D3L-C compact heater

Remove/install overheating sensor

D83.70-1301-09

1 Seal

2 Cover

3 Bolt

4 Body-bound rivet

5 Upper casing half

11 Overheating sensor plug

12 Overheating sensor

13 Bolt

14 Insulating shell

15 Outlet shroud

6 Lower casing half

7 Heat exchanger

8 Glow plug

9 Auxiliary heating control unit

10 14-pin plug

Remove/Install

1

Remove heater unit

Models 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4 as of 753731 as of 03.11.97

AR83.70-D-5302G

Models 901.6, 902.6, 903.6, 904.6

Models WD1, WD2, WD3, WD6, WD7 up to 382001 up to 11.03.02

AR83.70-D-5302K

2

Remove heater from the housing

Models 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4 as of 753731 as of 03.11.97

AR83.70-D-5399C

Models 901.6, 902.6, 903.6, 904.6

Models WD1, WD2, WD3, WD6, WD7 up to 382001 up to 11.03.02

AR83.70-D-5399A

3

Unscrew bolt (3) and remove cover (2) with gasket (1)

Installation: Check gasket (1) for damage and replace if necessary.

4

Unlock 14-pin plug (10) and disconnect from auxiliary heater control unit (9)

5

Detach connection lines from the glow plug (8)

6

Detach trim parts (5, 6, 14, 15)

AR83.70-D-5398-05C

7

Disconnect plug (11) of overheating sensor (12) from auxiliary heater control unit (9)

Installation: Observe accurate cable routing.

8

Unscrew screws (13) from overheating sensor (12).

9

Remove overheating sensor (12)

10

Install in the reverse order

Henviste dokumenter