AR83.70-D-5652A | Removing and installing fuel metering pump | 4.11.96 |
MODEL 902.32# /42#, 903.32# /42#, 904.32# /42# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation D1L-C
MODEL 903.02# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation B1L-C
D83.70-0017-06
1 Fuel line to fuel tank
2 Hose clamp
3 Fuel metering pump
4 Holder
5 Hose clamp
6 Fuel line to heater
7 Electrical connector
8 Electrical connector
| Removal, installation | ||
Danger! | Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation | Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves. | |
Danger! | Fuel vapors present an explosion hazard. Fuel vapors are toxic when inhaled or absorbed. Contact with fuel can cause eye and skin injury. | Fire, open lights and smoking prohibited. Wear protective clothing when handling fuel. | |
1 | Loosen hose clamp (2) and pull off fuel hose (1) | Catch fuel running out. | |
2 | Loosen hose clamp (5) and pull off fuel hose (6) | Catch fuel running out. | |
3 | Disconnect electrical connectors (7, 8) | ||
4 | Remove fuel metering pump (3) | ||
5 | Install in opposite order |
Henviste dokumenter
- as4700z000101a Fare for eksplosion ved tænding, fare for forgiftning ved indånding og indtagelse af brændstof samt fare for hud- og øjenskader ved kontakt med brændstof
- as8370z000201a Fare for eksplosion på grund af brændstofdampe, fare for forgiftning ved indånding af forbrændingsgas og fare for personskade på grund af forbrændinger, under eller efter at varmesystemet har været i drift.