ar8325s1402s

Remove/install water collector

Type ar · emne 83.25 · version 0205 · 2019-12-09

Gælder for: Model 636, 639

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.25 Varmeautomatik — Serie 636 · Serie 639

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.38 kofanger/spoiler/beklædning udvendig/opbevaringsboks/frontbeskyttelse › 35.38.44 beklædning/liste/frontbeskyttelse — Serie 636 · Serie 639

AR83.25-S-1402S

Remove/install water collector

06.12.2019

Model

636, 639

Remove/install water collector

N83.25-2031-09

Shown on model 639 with engine 112 up to vehicle identification number (FIN) 040633 and without CODE F46 (Headlamp cleaning system)

1

Insulation

4

Screw

2

Electrical wiring harness with grommet

5

Water collector

3

Water hose

Y58/1

Purging switchover valve (only with engine 112)

Remove/install water collector

Shown on model 639 with engine 642 as of FIN 394497 with CODE HH4 (Automatic air conditioning)

8

Nut

S83.30-4553-04

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

Remove/install

1

Perform disable or initial startup for high-voltage on-board electrical system


Model 639.603/703 with engine 780.994
with code MA0 (E-CELL 60 kW)

AR54.10-S-1160EV

2

Remove air filter housing


Model 636, 639 with engine 272, 646, 651
Model 639 with engine 112

AR09.10-S-1150S

Model 639 with engine 642

AR09.10-S-1150SE

3

Remove windshield wiper system

AR82.30-S-6400S

4

Remove insulation (1)

Installation: Attach insulation (1) in intended holes.

5

Remove electrical wiring harness with grommet (2)

6

Remove the water hose (3)

7

Unhook purging switchover valve (Y58/1)

Model 639 with engine 112

8

Unscrew nuts (8)

Model 636, 639.### ## as of 394497
with code HH4 (THERMOTRONIC automatic climate control)
Model 636, 639.### ## as of 394497
with code HH9 (Air conditioner, automatic heater control)

9

Remove high-voltage line at water collector (5)

Model 639.603/703 with engine 780.994
with code MA0 (E-CELL 60 kW)

10

Remove bolts (4)

On model 636, 639.### ## as of FIN 040634, one of the screws/bolts (4) is screwed in from the front at the master brake cylinder bracket.

11

Remove air/water duct (5)


Handle water collector (5) with care.
Otherwise water collector (5) may be damaged.

12

Modify detachable parts of water collector (5)

Only when replacing water collector (5).

13

Install in the reverse order

Henviste dokumenter