1 | Bolts |
2 | Electrical connector |
3 | Wiper linkage |
M6/1 | Windshield wiper motor |
S82.30-4508-04
| Remove/install | ||
Warning | Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
1 | Remove paneling on center piece in front of the windshield | ||
2 | Remove bolt (1) | Screw/bolt, wiper linkage to firewall | |
Torque wrench | |||
3 | Disconnect electrical connector (2) from wiper motor (M6/1) | ||
4 | Remove wiper linkage (3) with windshield wiper motor (M6/1) | The windshield wiper motor (M6/1) must not be separated from the wiper linkage (3). | |
5 | Install in the reverse order | ||
| Check | ||
6 | Perform function check of windshield wiper system |
001 589 72 21 00
Torque wrench
Henviste dokumenter
- ah0000z030001a Generelle oplysninger ved køretøjer med højvoltsnet og/eller litium-ion-batteri og/eller gasdrivsystem samt personligt beskyttelsesudstyr
- ar8800s2792s
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)
- as8230z000101a Fare for personskade på grund af fastklemning eller knusning, i særlige tilfældefor afskæring af legemsdele ved arbejde på vinduesviskermekanikken.