P83.40-4315-06
Shown with code (581) Comfort automatic air conditioning
1 Screw
2 Cover
3 Instrument panel
4 Electrical connectors
N22/7 Automatic air conditioning control and operating unit
| Remove/install | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Buffer the basic data of the automatic air conditioning control and operating unit (N22/7) in STAR DIAGNOSIS | When replacing the automatic air conditioning control and operating unit (N22/7). | |
Installation: Transfer the buffered basic data onto the new automatic air conditioning control and operating unit (N22/7). | |||
| Connect STAR DIAGNOSIS and read out fault memory | ||
2 | Move selector lever or gearshift lever to rearmost position | Depending on vehicle configuration. | |
3 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | KEYLESS-GO start/stop button only with code (889) Keyless Go. | |
4 | Remove radio | ||
5 | Open cover (2) and remove screws (1) | ||
6 | Unclip automatic air conditioning control and operating unit (N22/7) by pulling to rear out of the instrument panel (3) and remove far enough from the instrument panel (3) so that the electrical connectors (4) are accessible | ||
7 | Separate electrical connectors (4) | ||
8 | Install in the reverse order | ||
9 | Teach in and normalize the actuator motors | The actuator motor is taught in via STAR DIAGNOSIS. | |
| Connect STAR DIAGNOSIS and read out fault memory |
Henviste dokumenter
- ad0000p200004a
- ad0000p200004a
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ar8260p7502ew Af- og påmontering af radio