AR83.25-D-1001A | Disassemble and assemble heater housing | 12.3.08 |
MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4
D83.20-0002-06
1 Cross-recessed screw
2 Cross-recessed screw
3 Seal (bonded)
4 Seal (bonded)
5 Washer
6 Heater housing cover
7 Heat exchanger
8 Heater flap lever
9 Heater flaps
10 Heater flap lever
11 Heater flap
12 Fuse
| Disassemble/assemble | ||
1 | Remove regulating valve | ||
2 | Unscrew cross-recessed screw (1, 2) | ||
3 | Remove bonded seals (3, 4) | Installation: Replace seals. | |
4 | Remove heater housing cover (6) | ||
5 | Remove heat exchanger (7) | ||
6 | Push in retainer (12) of heater flap lever (8) and pull out heater flap lever (8) | ||
7 | Pull heater flaps (9) out of heater housing cover (6) | ||
8 | Rotate heater flap lever (10) as far as it will go (arrow) and unhook at heater flap (11) | ||
9 | Pull out heater flap lever (10) | ||
10 | Remove heater flap (11) with pulley (5) | ||
11 | Install in the reverse order |