ar8325d1001a

Disassemble and assemble heater housing

Type ar · topic 83.25 · version 0102 · 2008-03-26

Applies to: MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 901 (models 0**, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 4**) · Series 904 (models 0**, 3**, 4**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Series 901 (models 0**, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 4**) · Series 904 (models 0**, 3**, 4**)

AR83.25-D-1001A

Disassemble and assemble heater housing

12.3.08

MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Disassemble and assemble heater housing

D83.20-0002-06

1 Cross-recessed screw

2 Cross-recessed screw

3 Seal (bonded)

4 Seal (bonded)

5 Washer

6 Heater housing cover

7 Heat exchanger

8 Heater flap lever

9 Heater flaps

10 Heater flap lever

11 Heater flap

12 Fuse

Disassemble/assemble

1

Remove regulating valve

AR83.25-D-1151A

2

Unscrew cross-recessed screw (1, 2)

3

Remove bonded seals (3, 4)

Installation: Replace seals.

4

Remove heater housing cover (6)

5

Remove heat exchanger (7)

6

Push in retainer (12) of heater flap lever (8) and pull out heater flap lever (8)

7

Pull heater flaps (9) out of heater housing cover (6)

8

Rotate heater flap lever (10) as far as it will go (arrow) and unhook at heater flap (11)

9

Pull out heater flap lever (10)

10

Remove heater flap (11) with pulley (5)

11

Install in the reverse order

Referenced documents