P82.70-7732-08
Shown on model 217.3 |
1 | Telematics services communication module | 4 | Control unit bracket | |
2 | Control unit bracket | 5 | Electrical connectors | |
3 | Screw |
Shown on model 217.4 |
1 | Telematics services communication module |
3 | Screw |
4 | Control unit bracket |
5 | Electrical connectors |
P82.75-0001-06
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Perform initial startup of the telematics services communications module (1) using the diagnostic system | When replacing the telematics services communications module (1). | |
| |||
2.1 | Remove paneling in trunk at partition wall | Model 217.3 | |
2.2 | Remove crash plate | Model 217.4 | |
3 | Unclip control unit bracket (2) and place to one side with electrical lines connected | Model 217.3 | |
4 | Remove screw/bolt (3) of telematics services communications module (1) | ||
5 | Remove telematics services communications module (1) at control unit bracket (4) | ||
6 | Disconnect electrical connectors (5) at the telematics services communications module (1) | ||
7 | Install in the reverse order |
Henviste dokumenter
- ad0000p200004b
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ar5410p0005lca
- ar6830p4600lc