Remove/install radio

AR82.60-P-7502RT

Remove/install radio

3.8.06

26.7.06

Disconnect/connect ground line for battery and carry out basic programming removed

Steps 2 and 11

 

Remove/install



Notes on avoiding damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Read out coding of COMAND operating, display and controller unit (A40/3) or of radio

 Only when installing a new device and if the coding can still be read out with STAR DIAGNOSIS.



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A

2

Unclip center part of instrument panel (2) using long wedge (1), remove and put down on the center console

 Place on a soft underlay, as otherwise the center part of instrument panel (2) and/or the center console can be damaged.

 Installation: First, insert the center part of the instrument panel (2) with the two lower notches into the lugs (5), then fold upwards and clip in.

 Long wedge

*115589035900

3

Remove screws (4) and slide the locking rails (3) all the way to the bottom (arrows A)

4

Pull out COMAND operating, display and controller unit (A40/3) or the radio

5

Unlock and disconnect antenna plugs (6) and connectors (7).

 The number and geometry of the antenna plugs (6) and the connectors (7) can vary depending on the type of radio.

6

Remove COMAND operating, display and controller unit (A40/3) or the radio

7

Slide carrier (8) to the right (arrows B) and remove forwards (arrow C)

 Only when installing a new device.

8

Install in the reverse order

9

Code COMAND operating, display and controller unit (A40/3) or the radio

 Only when installing a new device.



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00