ar8210s4660p

Remove/install headlamp control unit

Type ar · emne 82.10 · version 0100 · 2018-12-11

Gælder for: Model 470, 471 with code LG7 (LED high-performance headlamps)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 82 El-system, karrosseri › 82.10 Udvendig belysning — Serie 470 · Serie 471

EinPAS 30 Belysningsanlæg › 30.15 Udvendig belysning › 30.15.11 Styreenhed/relæ — Serie 470 · Serie 471

AR82.10-S-4660P

Remove/install headlamp control unit

21.11.2018

Model

470, 471

with code LG7 (LED high-performance headlamps)

Remove/install headlamp control unit

Shown on the right lamp unit

1

Headlamp control unit

2

Bolts

3

Electrical connector

4

Seal

S82.10-4684-04

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Perform commissioning on headlamp control unit (1).

If the headlamp control unit (1) is replaced.

AD00.00-S-2000-06P

2

Remove headlamp.

AR82.10-S-4733P

Installation: The headlamp is adjusted following commissioning of the headlamp control unit.

3

Unscrew bolts (2).

4

Lift headlamp control unit (1) and disconnect electrical connector (3).

5

Check seal (4) for damage and correct seating.

If the seal (4) is damaged.

replace seal (4).

If the seal (4) is not correctly seated in the mount on the headlamp.

Correctly position seal (4).

6

Install in the reverse order

Check

7

Check headlamp adjustment and correct if necessary.

AR82.10-S-1131P

Henviste dokumenter