Remove/install front lamp unit

AR82.10-S-4733P

Remove/install front lamp unit

14.12.2018

Model

470, 471

Shown on right side of vehicle on model 470 with code L12 (Halogen headlamp)

1

Electrical connectors

E1

Left front lamp unit

E2

Right front lamp unit

Shown on right side of vehicle on model 470 with code L12 (Halogen headlamp)

3

Screw

E1

Left front lamp unit

E2

Right front lamp unit

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

Model 470, 471
with code LG7 (LED high-performance headlamps)

AH54.00-P-0001-01A



Remove

1

Remove front bumper.

AR88.20-S-2000P

2

Place a rag between the lamp unit (E1, E2) and the front fender (arrows A) and fix in place.


Cover up sharp edges on inside of front fender using a rag.
Otherwise the lamp unit (E1, E2) will be damaged.

3

Disconnect electrical connectors (1).

4

Unscrew bolts (3).

5

Unclip lamp unit (E1, E2) (arrows B) and remove toward front.



Install

6

Position lamp unit (E1, E2) on vehicle and clip into place (arrows B).

7

Tighten bolts (3).

8

Connect electrical connectors (1).

9

Remove rag from fender.

10

Install front bumper.

AR88.20-S-2000P

11

Commission lamp unit (E1, E2).

Model 470, 471
with code LG7 (LED high-performance headlamps)
If the lamp unit (E1, E2) has been replaced.



AD00.00-S-2000-06P



Check

12

Perform function check of exterior lighting.



AP82.10-S-8251P

13

Check/correct headlamp adjustments

AR82.10-S-1131P