P82.10-2627-06
1 Cap
2 Electrical connector
B32/1 Automatic light switch daylight sensor
Modification notes
| Remove/install | ||
1.1 | Transfer basic data from automatic light switch daylight sensor (B32/1) to STAR DIAGNOSIS | When replacing automatic light switch daylight sensor (B32/1). Installation: Transfer buffered basic data to new automatic light switch daylight sensor (B32/1). | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system | |||
2 | Remove cover (1) | ||
3 | Disconnect electrical connector (2) from automatic light switch daylight sensor (B32/1) | ||
4 | Unclip automatic light switch daylight sensor (B32/1) | ||
5 | Remove automatic light switch daylight sensor (B32/1) | Lens of automatic light switch daylight sensor (B32/1) is bonded to windshield. Do not replace. | |
6 | Install in the reverse order |
Commercially available tools