Adjust hinged door

AR72.15-D-1021A

Adjust hinged door

25.11.09

MODEL 901, 902, 903, 904, 905

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

D72.15-0013-06

A Ridge pattern

B Door gap

1 Top door gap

2 A-pillar door gap

3 B-pillar door gap

4 Door gap on wheel well

5 Bottom door gap

	Adjust
1	Check gaps and ridge pattern on hinged door all the way around	 Ridge transitions flush without offset.	*BE72.15-N-1001-01A
			*BE72.15-N-1002-01A
			*BE72.15-N-1003-01A
			*BE72.15-N-1004-01A
			*BE72.15-N-1005-01A
2	Adjust door gap and ridge pattern	 Door gap B and ridge pattern A.	AR72.15-D-1021-01A
			*BA72.15-N-1007-01A
			*BA72.15-N-1013-01A
3	Adjust installation depth	Adjust front door contour transitions so that they are flush up to max. 1 mm recessed, rear up to 1 mm extension (wind noises). Rotary tumbler should engage in the center of the striker eye.	AR72.15-D-1021-02A
			*BA72.15-N-1002-01A
			*BA72.15-N-1007-01A
			*BA72.15-N-1013-01A

Hinged doors check values

Number	Designation		Model 690.6, 901, 902, 903, 904, 905	Model WD1/WD2/ WD3/WD6/ WD7/XD1/ XD2/XD3/ XD4/XD5/ XD6/XD7/ YD1/YD2/ YD3/YD4/ YD5/YD6/ YD7


BE72.15-N-1001-01A	Top door gap	mm	7 (0.5)	7 (0.5)
BE72.15-N-1002-01A	Bottom door gap	mm	8 (0.5)	8 (0.5)
BE72.15-N-1003-01A	A-pillar door gap	mm	8 (0.5)	8 (0.5)
BE72.15-N-1004-01A	B-pillar door gap	mm	7 (0.5)	7 (0.5)
BE72.15-N-1005-01A	Door gap on wheel well	mm	7 (0.5)	7 (0.5)

 Hinged doors

Number	Designation		Model 690.6, 901, 902, 903, 904, 905	Model WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7


BA72.15-N-1002-01A	Screw, outside rearview mirror to hinged door	Nm	25	25
BA72.15-N-1007-01A	Bolt, door hinge to hinged door	Nm	25	25
BA72.15-N-1013-01A	Bolt, striker bolt to B-pillar	Nm	25	25