Hinged doors
Number | Designation | Model | ||
BA72.15-N-1002-01A | Screw for outside rearview mirror on hinged door | Nm | 25 | |
BA72.15-N-1007-01A | Screw for door hinge on hinged door | Nm | 25 | |
BA72.15-N-1013-01A | Screw for locking bolt on B-pillar | Nm | 25 | |
D72.15-0015-01
A B-pillar
1 Loosen Torx screws (2).
2 Adjust installation depth by horizontally adjusting striker pin.
Adjust door flush to max. 1 mm extension.
Rotary tumbler should engage in center of striker pin
3 Tighten Torx screws (2).
D72.15-0017-01
B A-pillar
Adjust only if door extends too far outside at upper A-pillar.
Unscrew outside rearview mirror.
Loosen upper hinge and shim with 1 mm thick shop-made stainless steel plate (as shown in drawing)
Tighten hinge and screw on mirror.