Model | 906.657 |
with code P0E (Sprinter Tourer master code) | |
with code T16 (Sliding door right) | |
Support rod in front of right 1st seat row | |
Model | 906.657 |
with code P0F (Master code for Sprinter Tourer 19+1 Inland) | |
with code T16 (Sliding door right) | |
Support rod in front of right 1st seat row | |
Model | 906.657 |
with code P0G (Master code Sprinter Tourer 16+1) | |
with code T16 (Sliding door right) | |
Support rod in front of right 1st seat row | |
Model | 906.657 |
with code P0H (Master code Sprinter Tourer 19+1) | |
with code T16 (Sliding door right) | |
Support rod in front of right 1st seat row | |
Model | 906.657 |
with code PE4 (DCAA bus master code, Argen) | |
with code T16 (Sliding door right) | |
Support rod in front of right 1st seat row | |
Model | 906.657 |
with code PE5 (Mastercode, bus seats on raised base, Argen) | |
with code T16 (Sliding door right) | |
Support rod in front of right 1st seat row |
D68.70-0012-09
1 | Grab handle | 4 | Nut | 7 | Cover | ||
2 | Bolts | 5 | Screw | 8 | Sleeves | ||
3 | Flange | 6 | Counterpart | 9 | Reinforcement |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Completely open sliding door | ||
2 | Lay foot mats to side in area of support rod (1) | ||
3 | Remove trim from sliding door entrance | ||
Clip remover | |||
4 | Unscrew screws (2) from flange (3) | Bolts, flange for support rod in front of passenger seat to vehicle floor/floor covering | |
5 | Unscrew nut (4) | Nut, support rod in front of passenger seat to vehicle floor/reinforcement | |
6 | Unclip cover (7) over screw (5) | Clip remover | |
7 | Remove screw (5) | Counterhold lower counterpart (6) in reinforcement (9) in this connection. | |
Installation: First attach screws (2, 5) and nut (4), then tighten screw (5). | |||
Bolt, support rod in front of passenger seat to vehicle floor/reinforcement | |||
8 | Remove retaining rod (1) with flange (3) | ||
9 | Remove bushing (8) from floor covering and/or vehicle floor | In the case of additional work. | |
10 | Remove flange (3) from grab bar (1) | When replacing grab bar (1) and/or flange (3). | |
Installation: Attach grab bar (1) in flange (3). | |||
11 | Install in the reverse order |
Grab bar |
Number | Designation | Model 906.6 with code P0E (Mastercode Sprinter Tourer 16+1 Inland) or code P0F (Mastercode Sprinter Tourer 19+1 Inland) or code P0G (Mastercode Sprinter Tourer 16+1) or code P0H (Mastercode Sprinter Tourer 19+1) or code PE4 (Mastercode Bus, DCAA, Argen) or code PE5 (Mastercode Bus, pedestal seating, Argen) | |
BA68.70-N-1008-01B | Bolt, support rod in front of passenger seat to vehicle floor/reinforcement | Nm | 20 |
Grab bar |
Number | Designation | Model 906.6 with code P0E (Mastercode Sprinter Tourer 16+1 Inland) or code P0F (Mastercode Sprinter Tourer 19+1 Inland) or code P0G (Mastercode Sprinter Tourer 16+1) or code P0H (Mastercode Sprinter Tourer 19+1) or code PE4 (Mastercode Bus, DCAA, Argen) or code PE5 (Mastercode Bus, pedestal seating, Argen) | |
BA68.70-N-1009-01B | Nut, support rod in front of passenger seat to vehicle floor/reinforcement | Nm | 25 |
Grab bar |
Number | Designation | Model 906.6 with code P0E (Mastercode Sprinter Tourer 16+1 Inland) or code P0F (Mastercode Sprinter Tourer 19+1 Inland) or code P0G (Mastercode Sprinter Tourer 16+1) or code P0H (Mastercode Sprinter Tourer 19+1) or code PE4 (Mastercode Bus, DCAA, Argen) or code PE5 (Mastercode Bus, pedestal seating, Argen) | |
BA68.70-N-1010-01B | Bolts, flange for support rod in front of passenger seat to vehicle floor/floor covering | Nm | 10 |
452 589 01 63 00
Clip remover
Henviste dokumenter
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ah6800n000101s Oplysninger om udførelse af reparationsarbejde i kabinen
- ar7216d781601a