1 | Upper cover (of upper steering column trim) |
2 | Lower cover (of upper steering column trim) |
3 | Bellows |
4 | Lower steering column trim |
5 | Floor covering |
W68.30-1202-11
1 | Upper cover (of upper steering column trim) |
6 | Connection element |
7 | Cover |
W68.10-1110-11
Warning | Risk of injury from being trapped in the swivel range of steered axles | Ensure that no persons or objects are in the swivel range of all steered axles when turning the steering wheel. Do not stand in the swivel range of the additional steering axle when the engine is running. | |
Topical note | Notes on maintenance and repair work | ||
Topical note | Notes on self-locking nuts and bolts | ||
Notes on safety-relevant components | |||
| Remove/install | ||
1 | Position steering wheel to straight-ahead and fix in place | ||
2 | Remove ignition key | ||
3 | Position steering column to lowest position | ||
4 | Remove top cover (1) from bottom cover (2) | ||
5 | Remove upper cover (1) from trim (7) and remove upwards | Upper cover (1) is connected with four retaining clips to fabric connecting part (6) of trim (7). | |
6 | Remove lower cover (2) from steering column and boot (3) | ||
7 | Fold floor covering (5) to rear | ||
8 | Mark installation position of steering shaft to upper universal joint | ||
9 | Remove steering spindle from upper universal joint | Installation: Observe marking. | |
Fit bolt/nut, universal joint to steering shaft | |||
10 | Remove bottom steering column trim (4) | For this purpose, remove boot (3) at lower steering column trim (4). | |
11 | Install in the reverse order |
Henviste dokumenter
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ah0000z001901a Oplysninger om sikkerhedsrelevante komponenter
- ah4620n000101h Oplysninger om vedligeholdelses- og reparationsarbejde
- as4600z000201a Fare for personskade på grund af fastklemning ved ophold i svingområdet for styrede aksler