Remove/install side paneling in trunk

AR68.30-P-4800LWE

Remove/install side paneling in trunk

14.05.2019

Model

213.0/1

Shown on left side of vehicle on model 213.0 with code 287 (Folding backrest in rear)

1

Cover

3

Trunk lining

5

Tie-down eye

2

Rear center section paneling

4

Mounting clip

Shown on model 213.1

1

Cover

3

Trunk lining

6

Partition wall paneling

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

 

Remove/install

1

Remove rear-end center-section trim (2).

AR68.30-P-4785LW

2.1

Remove cover (1).

Model 213.0 (except 213.016/050/053/054), 213.1 (except 213.153)

AR68.30-P-4600LW

2.2

Remove high-voltage battery cover.

Model 213.016/053
except code 498 (Japanese version)
Model 213.050/054

Model 213.050

AR68.80-P-6000LHV

Model 213.016/053
except code 498 (Japanese version)
Model 213.054

AR68.80-P-6000LWH

3

Remove partition trim (6).

Model 213.0
with code 700 (Technology Local Content China)
Model 213.1

4.1

Remove tie-down eye (5).

Model 213.0
with code 287 (Folding seat backrests in rear passenger compartment)
Model 213.0
with code 30P (Stowage Space package)

 Model 213.0
with code 287 (Folding seat backrests in rear passenger compartment)
Model 213.0
with code 30P (Stowage Space package)Bolt, cargo retainers/tie-down eye to body

*BA68.50-P-1001-03J

4.2

Remove expansion rivet at trunk lining (3).

Model 213.0
except code 287 (Folding seat backrests in rear passenger compartment)
except code 30P (Stowage Space package)
Model 213.1

 An expansion rivet is installed instead of a tie-down eye (5).

 Dismantling tool

*000589956300

5

Remove retaining clips (4).

 Dismantling tool

*000589956300

6

Remove trunk lining (3) from rear to front in direction of arrow.

7

Install in the reverse order.

 Cargo retainers

Number

Designation

Model 213.0

BA68.50-P-1001-03J

Bolt, cargo retainers/tie-down eye to body

Nm

24