Remove/install paneling on B-pillar

AR68.30-P-4700TX

17.3.10

MODEL 219.3

P68.30-3034-09

1 Covering

2 Belt end fitting

3 Edge guard

7 Retaining clips

8 Seat belt

4 B-pillar paneling

5 Rear window seal

6 Retaining clips

P68.30-3035-12

4 B-pillar paneling

7 Retaining clips

9 Bolt mount

10 Pin

11 Guides

	Remove
1	Position seat toward front and move rear seat surface upward
2	Remove cover (1) from front seat
3	Remove belt end fitting (2) from front seat
4	Remove paneling from outer B-pillar		AR88.80-P-8550TX
5	Remove front and rear entrance paneling		AR68.30-P-4100TX
6	Remove front and rear edge guard (3) in area of B-pillar paneling (4)
7	Loosen rear window seal (5) in area of B-pillar paneling (4)
8	Press B-pillar paneling (4) off of retaining clips (6) with mounting wedge in direction of passenger compartment		*110589035900
9	Remove retaining clips (7) on B-pillar paneling (4) from B-pillar with suitable screwdriver	 Avoid damage to B-pillar
10	Move seat belt (8) through B-pillar paneling (4)
11	Remove B-pillar paneling (4)
	Install
12	Install retaining clips (6) on B-pillar
13	Install retaining clips (7) on B-pillar paneling (4)
14	Move seat belt (8) through B-pillar paneling (4)
15	Install guides (11) of B-pillar paneling (5) below headliner
16	Clip B-pillar paneling (4) into retaining clips (6) on B-pillar	 Insert bolt mount (9) into bolt (10) Ensure that retaining clips (6) are seated properly.
17	Check function of belt height adjustment on B-pillar	 It should be possible to adjust and arrest the belt height adjustment.
18	Clip retaining clips (7) on B-pillar paneling (4) into B-pillar (4)	 Ensure that retaining clips (7) are seated properly.
19	Moisten rear window seal (5) with lubricant in area of guide (arrow) and position with mounting wedge	 The mounting wedge should not have sharp edges
			*110589035900
			*BR00.45-Z-1010-06A
20	Install front and rear edge guard (3) on B-pillar
21	Install front and rear scuff plate		AR68.30-P-4100TX
22	Install belt end fitting (2) on front seat		*BA91.40-P-1001-01M
23	Install covering (1) on front seat
24	Install paneling outer B-pillar		AR88.80-P-8550TX

 Seat belts/emergency tensioning retractors

Number	Designation		Model 219


BA91.40-P-1001-01M	Bolt to front seat belt end fitting	Nm	32

Mounting wedge

110 589 03 59 00

Repair materials

Number	Designation	Order number
BR00.45-Z-1010-06A	Lubricant, rubber assembly 1 l	A 000 989 03 67

Henviste dokumenter