ar6830p4581tx

Remove rear shelf

Type ar · emne 68.30 · version 0100 · 2004-10-14

Gælder for: MODEL 219.3

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.30 Beklædninger, pynterammer — Serie 219 (modeller 3**)

EinPAS 37 Indvendigt udstyr › 37.45 Beklædning › 37.45.30 Beklædning kabine — Serie 219 (modeller 3**)

AR68.30-P-4581TX

Remove rear shelf

12.8.04

MODEL 219.3

Remove rear shelf

P68.30-3049-09

Shown with code (540) Electric sun shade for rear window

1 Rear shelf paneling

2 Expansion clip

3 Bolt (with code (540) Electric sun shade for rear window)

6 Foam rubber

7 Electrical roller blind (with code (540) Electric sun shade for rear window)

8 Insulation mat

4 Electrical connector (with code (540) Electric sun shade for rear window)

5 Electrical connector

Remove rear shelf

P68.30-3050-11

1 Rear shelf paneling

7 Electrical roller blind (with code (540) Electric sun shade for rear window)

E21 Center high-mounted stop lamp

Remove/Install

1

Completely move both front seats toward front

See Operating Instructions

2

Remove paneling at both C-pillars

AR68.30-P-4490TX

3

Remove rear headrests

AR91.16-P-1770TX

4.1

Remove speaker in rear shelf

On vehicles with code (540) Electric sun shade for rear window, in combination with code (810) Sound system

AR82.62-P-7836TX

5

Remove expansion clips (2)

6.1

Remove screws (3)

On vehicles with code (540) Electric sun shade for rear window

Accessible through luggage compartment.

7

Lift rear shelf paneling (1) and disconnect electrical connector (4) from electric roller blind (7) as well as electrical connector (5) for wiring harness from center high-mounted stop lamp (E21).

Electrical connector (4) only on equipment with code (540) electric sun shade for rear window

8.1

Lift rear shelf paneling (1) and remove foam rubber element (6)

On vehicles with code (540) Electric sun shade for rear window and without code (810) Sound system

Foam rubber element (6) is glued on

Installation: Glue on foam rubber element (6) with double-sided adhesive tape

9

Lift rear shelf paneling (1), pull toward front and remove

Observe insulating mat (8) below rear shelf paneling (1)

10.1

Remove electrical roller blind (7)

Only when replacing rear shelf paneling (1) on vehicles with code (540) Electric sun shade for rear window.

AR68.50-P-4600TX

11

Install in the reverse order

Henviste dokumenter