P91.16-2279-06
1 Head restraints
2 Surrounds
3 Rear shelf paneling
4 Release lever
5 Head restraint mechanism
6 Punch, Ø 8 mm
| Remove | ||
1 | Move left or right head restraint into upright position (1) by hand | ||
2 | Unclip trim pieces (2) from the rear shelf (3) | Note correct installation positions. | |
3 | Operate the left and right release levers (4) with an Ø 8 mm punch (6) | ||
4 | Pull head restraint (1) out of head restraint mechanism (5) | ||
| Install | ||
5 | Guide head restraint (1) into head restraint mechanism (5) until the head restraint (1) locks | ||
6 | Install covers (2) | Note correct installation positions. | |
7 | Perform head restraint folding function check | See Operating Instructions |