Remove/install trim at C-pillar

AR68.30-P-4490NKA

Remove/install trim at C-pillar

26.07.2013

MODEL

176

Shown on left side of vehicle

1

Cover

4

Nut

7

Seat belt

2

Cover

5

Edge guard

8

Flap

3

Cover

6

Edge guard

H4/62

Left rear surround speaker (with code 810 (Sound system)

Shown on left side of vehicle

1

Cover

9

Electrical connector

7

Seat belt

H4/62

Left rear surround speaker (with code 810 (Sound system)

 

Remove/install

1

Move left or right front seat forwards

2

Remove load compartment cover

3

Remove cover (3) and unscrew nut (4) from belt end fitting

 Nut, rear belt buckle/belt end fitting to body/pivot bearing

*BA91.40-P-1009-01S

4

Fold over left or right rear seat backrest

5

Unclip cover (2)

 Clip remover

*452589016300

6

Detach edge guard (6) in area of paneling (1)

7

Unclip paneling (1)

 Installation: Ensure that edge guard (5) is seated properly..

 Clip remover

*452589016300

8

Detach electrical connector (9) from left rear surround speaker (H4/62) or right rear surround speaker

MODEL 176
with CODE 810 (Sound system)

9

Remove trim panel (1)

 Simultaneously guide seat belt (7) through paneling (1).

 Installation: Insert cover (2) into paneling (1) with associated clip.

 Installation: Open flap (8) and slightly pull paneling away from C-pillar.

10

Unclip left rear surround speaker (H4/62) or right rear surround speaker () and remove

MODEL 176
with CODE 810 (Sound system)
When replacing trim (1).

11

Prepare paneling (1) on C-pillar for installing left rear surround speaker (H4/62) or right rear surround speaker.

When replacing trim (1).



Fabricate template for installing speakers in C-pillar trim

MODEL 176
with CODE 810 (Sound system)

WF58.50-P-6830-03A

MODEL 176
with CODE 810 (Sound system)

AR68.30-P-4490-01A

12

Install in the reverse order

 Seat belts/emergency tensioning retractors

Number

Designation

MODEL 176, 242, 246

BA91.40-P-1009-01S

Nut, rear belt buckle/belt end fitting to body/pivot bearing

Nm

35