Remove/install trim at C-pillar

AR68.30-P-4490LF

Remove/install trim at C-pillar

20.12.2017

Model

222.0/1

Modification notes

24.08.2017

Remove speaker cover and seat belt guide/trim.

Operation steps 7, 8 and 9.

Shown on model 222.1 with code Z07 (Top protection)

1

Cover

6

Buckle clamp

2

C-pillar paneling top section

7

Guide rail

3

C-pillar paneling bottom section

8

Roller sun blind

4

Edge guard

9

Pin

5

Nut

Shown on model 222.1 without code Z07 (Highest protection)

2

C-pillar paneling top section

7

Guide rail

Shown on model 222.1 with code Z07 (Top protection)

2

C-pillar paneling top section

12

Rivet

10

Headliner

13

Spring clip

11

Check strap

Shown on model 222.1 with code Z07 (Top protection)

1

Cover

2

C-pillar paneling top section

3

C-pillar paneling bottom section

14

Screw

15

Seat belt guide trim element

16

Seat belt retractor cover

17

Speaker cover

Topical note

Note on functional reliability of windowbag

AH91.60-P-0693-01A

 

Remove/install

1

Remove edge guard (4) in area of C-pillar trim (2, 3)

2

Unclip cover (1)

3.1

Unscrew nut (5)

Model 222.0/1
except code Z07 (Top protection)

 Nut/screw, trim bracket to C-pillar

*BA68.30-P-1002-01E

3.2

Remove screw (14) under cover (1)

Model 222.0/1
with code Z07 (Top protection)

 Nut/screw, trim bracket to C-pillar

*BA68.30-P-1002-01E

4

Unclip guide rail (7) from C-pillar paneling top section (2)

Model 222.0/1
with code 540 (Electric sunblind for rear window)
except code Z07 (Top protection)

  Install extraction hook in opening (arrow B), turn 90° and unclip guide rail (7) from top downward. Guide rail (7) is hooked into C-pillar paneling top section (2) at bottom.

 Installation: Ensure that pin (9) on roller blind (8) is seated correctly in guide rail (7). Ensure that guide rail (7) is seated correctly.

 Extraction hook

*140589023300

5

Lever retainer (arrow A) of C-pillar trim upper section (2) over roof lining (10)

6

Remove check strap (11) of roof lining (10) from C-pillar trim upper section (2)

Model 222.0/1
with code Z07 (Top protection)

 Slightly press in spring clip (13), guide rivet (12) together with check strap (11) out of opening.

 Installation: Ensure that check strap (11) and rivet (12) are seated correctly.

7

Unclip speaker cover (17) in upward direction

8

Unclip seat belt guide trim element (15) and allow to hang down

9

Unclip seat belt retractor cover (16)

10

Unclip C-pillar paneling top section (2) along rear window

11

Remove C-pillar paneling top section (2) in direction of travel

12

Unscrew buckle clamps (6)

Model 222.0/1
except code Z07 (Top protection)

 Installation: Replace buckle clamps (6).

13

Remove C-pillar trim lower section (3)

 Carefully swivel C-pillar trim lower section (3) toward front. Side trim in rear is connected via a pin with C-pillar trim lower section (3).

 Installation: Before assembly, install new strap buckles (6) on C-pillar trim lower section (3).

14

Install in the reverse order

 Paneling, trim piece

Number

Designation

Model 222

BA68.30-P-1002-01E

Nut/screw, trim bracket to C-pillar

Nm

5