P68.30-3425-01
Shown on vehicle without code (287) Through-loading feature and without code (224) Design rear bucket seat system
1 Rear seat belt
2 Screw
P68.30-3426-09
1 Rear seat belt
3 C-pillar paneling
4 Cover
5 Edge guard
10 Guides
11 Electric wiring harnesses
12 Rear shelf
6 Mounting wedge
7 Catch hook
8 Lug
9 Clip
P68.30-3427-04
3 C-pillar paneling
13 Roller sun blind (with code (540) Electric roller bind for rear window)
14 Guide rail (with code (540) Electric roller bind for rear window)
| Remove/install | ||
1 | Remove rear seat cushion | Vehicles without code (224) Design individual rear seat system | |
Vehicles with code (224) Design individual rear seat system | |||
2 | Unscrew bolt (2) from lower belt end fitting on rear seat belt (1) | ||
3 | Unclip catch hook (7) from cover (4) from bottom with assembly wedge (6) (see picture A). | Ensure that catch hooks (7) are not damaged. | |
| |||
4 | Lift cover (4) in lower area and turn approx. 90° in direction of arrow (arrow D) (see picture B). | Ensure that the stay (arrow F) or the catch hooks (7) are not damaged. | |
5 | Guide cover (4) out of C-pillar (3) in direction of arrow (arrow E) (see picture C). | Ensure that the stay (arrow F) or the catch hooks (7) are not damaged. | |
6 | Unclip guide rail (14) on roller sun blind (13) from C-pillar paneling (3) starting at top | On vehicles with code (540) Electric roller blind for rear window | |
The guide rail (14) can be replaced without removing the C-pillar paneling (3). | |||
Installation: Hook guide rail (14) into lower area of C-pillar paneling (3). Insert roller sun blind (13) into opening (arrow H). | |||
7 | Loosen edge guard (5) in area of C-pillar paneling (3). | ||
8 | Unclip clips (9) from C-pillar paneling (3), guide rear seat belt (1) through C-pillar paneling (3) and remove C-pillar paneling (3) | Installation: Ensure that lug (8) is not trapped in electric wiring harnesses (11) when installing C-pillar paneling (3). Otherwise electric wiring harnesses (11) are torn off of the contacts on the rear window and it is necessary to replace the rear window. | |
Installation: Check clips (9), replace if necessary. Insert lug (8) on C-pillar paneling (3) into opening (arrow G). Insert guides (10) on C-pillar paneling (3) into rear shelf (12). | |||
9 | Install in the reverse order |
Mounting wedge
110 589 03 59 00