Remove/install trim at C-pillar

AR68.30-P-4490EW

Remove/install trim at C-pillar

21.9.09

 

Remove/install

1

Remove rear seat cushion

Vehicles without code (224) Design individual rear seat system

AR91.12-P-1020CW

Vehicles with code (224) Design individual rear seat system

AR91.12-P-1020EW

2

Unscrew bolt (2) from lower belt end fitting on rear seat belt (1)

3

Unclip catch hook (7) from cover (4) from bottom with assembly wedge (6) (see picture A).

 Ensure that catch hooks (7) are not damaged.



*110589035900

4

Lift cover (4) in lower area and turn approx. 90° in direction of arrow (arrow D) (see picture B).

 Ensure that the stay (arrow F) or the catch hooks (7) are not damaged.

5

Guide cover (4) out of C-pillar (3) in direction of arrow (arrow E) (see picture C).

 Ensure that the stay (arrow F) or the catch hooks (7) are not damaged.

6

Unclip guide rail (14) on roller sun blind (13) from C-pillar paneling (3) starting at top

On vehicles with code (540) Electric roller blind for rear window

 The guide rail (14) can be replaced without removing the C-pillar paneling (3).

 Installation: Hook guide rail (14) into lower area of C-pillar paneling (3). Insert roller sun blind (13) into opening (arrow H).

7

Loosen edge guard (5) in area of C-pillar paneling (3).

8

Unclip clips (9) from C-pillar paneling (3), guide rear seat belt (1) through C-pillar paneling (3) and remove C-pillar paneling (3)

 Installation: Ensure that lug (8) is not trapped in electric wiring harnesses (11) when installing C-pillar paneling (3). Otherwise electric wiring harnesses (11) are torn off of the contacts on the rear window and it is necessary to replace the rear window.

 Installation: Check clips (9), replace if necessary.

Insert lug (8) on C-pillar paneling (3) into opening (arrow G).

Insert guides (10) on C-pillar paneling (3) into rear shelf (12).

9

Install in the reverse order