P68.30-3649-09
Shown on left side of vehicle |
1 | Screw | 3 | Edge guard | 5 | Expansion rivet | ||
2 | Upper C-pillar trim | 4 | Seat belt guide | 6 | Lower C-pillar trim |
7 | Nut |
8 | Door sill |
9 | Nut |
P68.30-3651-06
| Remove/install | ||
1 | Loosen edge guard (3) in area of upper C-pillar paneling (2) | ||
2 | Unclip upper C-pillar paneling (2) | ||
3 | Remove rear seat cushion | ||
4 | Remove inner side bolster from lower C-pillar paneling (6) | ||
5 | Loosen edge guard (3) in area of lower C-pillar paneling (6) | ||
6 | Remove door sill molding (8) | ||
7 | Unscrew nut (9) | ||
8 | Fold rear seat backrest toward front | ||
9 | Unscrew nut (7) | ||
10 | Removing inside trim panel on side of cargo area | ||
Detach rear side paneling in upper area only until upper paneling can be removed. | |||
11 | Remove seat belt from seat belt guide (4) | Installation: Make sure seat belt is not twisted when installed. | |
12 | Unscrew bolt (1) and remove seat belt guide (4) | ||
13 | Remove expansion rivet (5) | ||
14 | Remove lower C-pillar paneling (6) | ||
15 | Install in the reverse order |