P68.30-3650-09
Shown on left side of vehicle |
1 | Rear backrest release | 4 | Interior trim rear section | 7 | Interior trim front section | ||
2 | Expansion clips | 5 | Cover | 10 | Expansion clips | ||
3 | Trunk sill cover | 6 | Cover | 11 | Cover |
8 | Upper side load compartment paneling |
9 | Bolts |
P68.30-3645-06
| Remove/install | ||
1 | Fold rear seat backrests toward front | ||
2 | Remove cargo area cover | ||
3 | Remove cover (5) | ||
4 | Remove cover from rear backrest release (1) | Clip remover | |
5 | Remove expansion clips (2) from cover (11) and remove cover (11) | Clip remover | |
Danger ! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
6 | Unclip trunk sill cover (3) and remove | Clip remover | |
7 | Take off cover (6) | Clip remover | |
8 | Remove expansion clips (10) | If necessary, lift load compartment floor. | |
Clip remover | |||
9 | Remove interior trim rear section (4) | ||
10 | Disconnect connector from auxiliary socket | Only when removing interior trim front section (7). | |
11 | Remove interior trim front section (7) | ||
12 | Remove bolts (9) | ||
13 | Remove upper side cargo area paneling (8) toward inside | ||
14 | Install in the reverse order |
452 589 01 63 00
Clip remover
Henviste dokumenter
- as0000z001701a Fare for personskade på grund af snitsår eller hudafskrabninger grundet skarpkantede køretøjsdele