ar6830p4300lc

Remove/install headliner

Type ar · emne 68.30 · version 0200 · 2017-09-08

Gælder for: Model 217.3

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.30 Beklædninger, pynterammer — Serie 217 (modeller 3**)

EinPAS 37 Indvendigt udstyr › 37.45 Beklædning › 37.45.32 loftsbeklædning — Serie 217 (modeller 3**)

AR68.30-P-4300LC

Remove/install headliner

23.08.2017

Model

217.3

Modification notes

17.08.2017

Microphones and brackets of hands-free system microphones in roof lining.

Operation step 15.

Remove/install headliner

P68.30-3783-09

Shown on model 217.3 up to model year 2018

1

Headliner

5

Cover on inside rearview mirror

9

Coat hook

2

Service flap

6

Overhead control panel control unit

10

Screw

3

Upper C-pillar trim

7

Sun visors

11

Retaining clips

4

A-pillar trim panel

8

Edge guard

Remove/install headliner

P68.30-3782-08

Shown on model 217.3 up to model year 2018

11

Retaining clips

14

Solenoids

12

Retaining clips

15

Electrical wiring harness

13

Guide hook

16

Interior lamp

Remove/install headliner

Shown on model 217.3 as of model year 2018

17

Brackets of hands-free system microphones

P68.30-4018-11

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Completely open roller sun blind

2

Remove left and right upper C-pillar trim (3)

AR68.30-P-4490LC

3

Unclip service flap (2) and guide out towards rear

4

Remove the left and right A-pillar paneling (4).

AR68.30-P-4050LF

5

Remove cover on inside rearview mirror (5)

AR68.40-P-0001LC

6

Remove overhead control panel control unit (6)

AR82.20-P-1000LF

7

Remove left and right sun visor (7)

AR68.60-P-5480NKB

8

Detach edge guard (8) in area of headliner (1)

9

Remove coat hooks (9)

For this purpose, release (arrow a) coat hooks (9) using suitable tool and remove.

10

Remove screw/bolts (10)

11

Unclip retaining clips (11)

12

Unclip retaining clips (12)

13

Pivot headliner (1) toward rear

Slide roof lining (1) toward rear until guide hooks (13) can be guided out of roof paneling mounts.
The headliner (1) is always fastened to the roof paneling with 2 magnets (14).

14

Guide out headliner (1)

Helper required.

15

Modify driver's hands-free system microphone (B25/20) and front passenger hands-free system microphone (B25/21) as well as brackets of microphones (17)

Model 217.3
as of model year 2018
When replacing roof paneling (1).

16

Modify electrical wiring harness (15)

When replacing roof paneling (1).

Electrical wiring harness (15) varies depending on the equipment.

17

Modify interior lamp (16) in rear

When replacing roof paneling (1).

18

Install in the reverse order

Henviste dokumenter