P68.30-3779-09
1 | C-pillar paneling top section | 4 | Edge guard | 8 | Roller sun blind | ||
1.1 | Cover | 5 | Bracket | 9 | Pin | ||
2 | C-pillar paneling bottom section | 6 | Screw | 10 | Headliner | ||
3 | Nut | 7 | Guide rail | 11 | Clamping buckles |
| Remove/install | ||
1 | Remove edge guard (4) in area of C-pillar paneling (1, 2) | ||
2 | Unclip cover (1.1) | ||
3 | Unscrew nut (3) | ||
4 | Unclip guide rail (7) from C-pillar paneling top section (1) | Install extraction hook in opening (arrow B), turn 90° and unclip guide rail (7) from top downward. Guide rail (7) is hooked into C-pillar paneling top section (1) at bottom. | |
Installation: Ensure that pin (9) on roller blind (8) is seated correctly in guide rail (7). Ensure that guide rail (7) is seated correctly. | |||
Extraction hook | |||
5 | Pry shackle (arrow A) on C-pillar paneling top section (1) over headliner (10) | ||
6 | Unclip C-pillar paneling top section (1) from C-pillar paneling bottom section (2) | ||
7 | Slightly pull headliner (10) down in area of bracket (5) | When removing C-pillar paneling bottom section (2) | |
So that bolt (6) can reach bracket (5). | |||
8 | Remove screw/bolt (6) and remove bracket (5) | When removing C-pillar paneling bottom section (2) | |
9 | Remove clamping buckles (11) together with C-pillar paneling bottom section (2) | When removing C-pillar paneling bottom section (2) | |
Installation: Replace clamping buckles (11) if required. | |||
| Check | ||
10 | Check all retaining clips for damage | If necessary | |
| |||
Replace retaining clip. | |||
11 | Install in the reverse order |
140 589 02 33 00
Extraction hook