Remove/install paneling on A-pillar

AR68.30-D-4050M

Remove/install paneling on A-pillar

31.05.2016

Model

900, 906

Shown on model 906 with code SH9 (Windowbag for driver and front passenger)

1

Cover

3

Frame seal

1.1

Guide

4

Screw

1.2

Guide

5

Check strap

2

Cover

6

Retaining clips



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Remove

1

Unclip cover (2) and remove

 Long wedge

*115589035900

2.1

Unclip cover (1) at retaining clips (6), slide out of guide (1.2) and remove

Model 900
Model 906
except code SH9 (Windowbag for driver and co-driver)

2.2

Unclip cover (1) at retaining clips (6), slide out of guide (1.2) and place suspended from check strap (5)

Model 906
with code SH9 (Windowbag for driver and co-driver)

3

Unscrew bolt (4) and remove cover (1)

Model 906
with code SH9 (Windowbag for driver and co-driver)

 Pay attention to assembly position of check strap (5).



Check

4

Check retaining clips (6) for damage

for damage



Replace respective retaining clip (6)



Install

5

Align check strap (5) and fasten with bolt (4)

Model 906
with code SH9 (Windowbag for driver and co-driver)

 Do not install check strap (5) twisted.

 Bolt, windowbag at A-pillar

*BA91.60-N-1005-01A

6

Position guides (1.1, 1.2) of cover (1) and install cover (1)

 Model 906
with code SH9 (Windowbag for driver and co-driver)
Make sure that check strap (5) is correctly seated behind cover (1).

7

Install cover (2)

8

Position frame seal (3) on cover (1)

 Airbag

Number

Designation

Model 906

BA91.60-N-1005-01A

Bolt, windowbag at A-pillar

Nm

4