P68.10-2524-09
1 Glove compartment
2 Air duct
3 Edge protection
4 Cover
8 Twist lock
9 Screw
E13/1 Glove compartment lamp
5 Paneling
6 Screw
7 Screw
| Removing, installing | ||
1 | Remove air duct (2) | ||
2 | Remove edge guard (3) in area of paneling (5) | ||
3 | Unclip cover (4) with suitable screwdriver and unscrew screw beneath | ||
4 | Unclip paneling (5) with long wedge and remove | | |
5 | Unscrew screws (6, 7, 9) | ||
6 | Turn twist locks (8) 90° and remove | ||
7 | Lower glove compartment (1) until glove compartment lamp connector (E13/1) is accessible | ||
8 | Disconnect glove compartment lamp connector (E13/1) | ||
9 | Remove glove compartment (1) | Installation: Ensure that guide is seated properly on center console (arrow) | |
10 | Install in the reverse order |
Long wedge
115 589 03 59 00