ar6810p1400gd

Removing and installing glove compartment

Type ar · topic 68.10 · version 0100 · 2001-01-19

Applies to: MODEL 168 as of 1.3.01

Where it sits

Function group 3 Body › 68 Interior equipment › 68.10 Instrument panel — Series 168

EinPAS 37 Interior equipment › 37.15 Instrument panel › 37.15.42 Glove compartment/stowage compartment/cup holder/ashtray — Series 168

AR68.10-P-1400GD

Removing and installing glove compartment

10.11.00

MODEL 168 as of 1.3.01

Removing and installing glove compartment

P68.10-2524-09

1 Glove compartment

2 Air duct

3 Edge protection

4 Cover

8 Twist lock

9 Screw

E13/1 Glove compartment lamp

5 Paneling

6 Screw

7 Screw

Removing, installing

1

Remove air duct (2)

2

Remove edge guard (3) in area of paneling (5)

3

Unclip cover (4) with suitable screwdriver and unscrew screw beneath

4

Unclip paneling (5) with long wedge and remove

*115589035900

5

Unscrew screws (6, 7, 9)

6

Turn twist locks (8) 90° and remove

7

Lower glove compartment (1) until glove compartment lamp connector (E13/1) is accessible

8

Disconnect glove compartment lamp connector (E13/1)

9

Remove glove compartment (1)

Installation: Ensure that guide is seated properly on center console (arrow)

10

Install in the reverse order

Removing and installing glove compartment

Long wedge

115 589 03 59 00