Test and adjustment values for windshield
Number | Designation | Model | ||
BE67.10-N-1002-01E | Distance between window and window surround | Dimension "H" | mm | 4 |
For figure, see | ||||
Repair materials
Number | Designation | Order number |
BR00.45-Z-1019-02A | Bonding agent Sika primer 206 G+P | Sika Deutschland GmbH |
BR00.45-Z-1023-04A | Sika activator | A 005 989 58 71 |
BR00.45-Z-1003-10A | Spacer 5X8X15 mm | A 357 616 03 90 |
BR00.45-Z-1002-10A | Spacer, hinge at flap 510653 01 | A 357 616 02 90 |
BR00.45-Z-1001-10A | Spacer for 613 640 11 09/613 640 12 09 | A 357 616 01 90 |
T67.10-0031-06
3 Spacer
H Distance between window and window surround
1 Cut off glue residues on window cutout with scraper to a height of approx. 0.2 mm to 0.3 mm
2 Remove loose glue (glue not completely cut off) from window cutout
3 Prime paint damages in area of window cutout
4 Clean gluing surface on window cutout with activator.
Use cleaning mat for cleaning surface to be glued.
5 Allow activator to air-dry for at least 10 minutes.
6 Apply bonding agent to gluing surfaces
The gluing surface on the window cutout must be covered with the bonding agent completely.
7 Allow bonding agent to air-dry completely.
8 Attach spacers (3) at uniform intervals on gluing surface of window cutout
The spacers (3) are available in various thicknesses and should be combined as required to obtain the specified distance between the window and window frame (H)