ar6700s0001p

Remove/install window at front on hardtop

Type ar · emne 67.00 · version 0100 · 2019-01-08

Gælder for: Model 470 with code Y1D (Hardtop) Model 470 with code Y1E (Hardtop with roof railing)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 67 Ruder og vinduer › 67.00 Generelt — Serie 470

EinPAS 36 Syn › 36.15 Rude/vindue › 36.15.41 Sideruder — Serie 470

EinPAS 36 Syn › 36.15 Rude/vindue › 36.15.45 Skyderude/klaprude/ventilationsrude — Serie 470

AR67.00-S-0001P

Remove/install window at front on hardtop

17.12.2018

Model

470

with code Y1D (Hardtop)

Model

470

with code Y1E (Hardtop with roof railing)

Remove/install window at front on hardtop

1

Cover

2

Expansion rivet

S67.00-A000-06

Remove/install window at front on hardtop

3

Electrical line

4

Bolts

5

Window frame

S67.00-A001-06

Remove/install window at front on hardtop

6

Driver's cab

7

Rear window of driver's cab

8

Window(s)

9

Hardtop

S67.00-A002-06

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Remove/install

1

Cover the driver's cab (6) in the rear area with a welding protection blanket.

Commercially available devices/tools
Welding protection blanket

2

Remove trim (1).

To do so, unclip the expansion rivet (2).

Installation: Replace expansion rivet (2).

3

Remove electrical line (3) from the window frame (5).

4

Remove the window frame (5).

For this purpose, remove bolts (4).

Screw, window frame to hardtop window

*BA60.30-N-1071-01P

5

Remove window (8).

Topical note

Notes on removal/installation of windows

AH67.10-P-1000-02RT


Secure the window (8) against falling down or bumping into other components when removing it.
Otherwise, this can cause damage to the driver's cab (6), the rear window in the driver's cab (7) and the hardtop (9).

To do so, press the window (8) carefully forwards in the direction of the arrow, and guide the window (8) out between the hardtop (9) and the driver's cab (6).
Helper required.

6

Install in the reverse order.

Platform

Number

Designation

Model 470, 471

BA60.30-N-1071-01P

Screw, window frame to hardtop window

Nm

5

Henviste dokumenter