ar6430d570503a
Preparing right outer corner pillar paneling bottom section for installation
Type ar · emne 64.30 · version 0109 · 2006-10-31
Gælder for: MODEL 901.06 /36 /37 /46 /66 /67, 902.06 /07 /36 /37 /46 /47 /66 /67, 903.06 /07 /36 /37 /46 /47 /66 /67, 904.06 /36 /46 /66 MODEL 690.63 /64
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 3 Karrosseri › 64 Bagvæg og hæk › 64.30 Hjørneplade — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 06*, 36*, 46*, 66*)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.31 Bagvæg/hæk › 35.31.30 Bagvæg/hæk — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 06*, 36*, 46*, 66*)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.34 Sidevæg › 35.34.45 Stolpe — Serie 690 (modeller 63*, 64*) · Serie 901 (modeller 06*, 36*, 37*, 46*, 66*, 67*) · Serie 902 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 903 (modeller 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · Serie 904 (modeller 06*, 36*, 46*, 66*)
AR64.30-D-5705-03A
| Preparing right outer corner pillar paneling bottom section for installation
|
|
|
WE58.40-Z-1001-03A
| Drill (electric/pneumatic)
|
WE58.40-Z-1003-03A
| Angle grinder (electric/pneumatic)
|
WE58.40-Z-1004-03A
| Body saw (electric/pneumatic)
|
WE58.40-Z-1005-03A
| Wet/dry vacuum cleaner
|
Number
| Designation
| Order number
|
BR00.45-Z-1001-07A
| Zinc dust paint suitable for spot welding
| A 000 986 34 42
|
1 Mark separation line (dotted line, 25) with the following dimension:
a = approx. 200 mm.
2 Separate right outer corner pillar paneling (1) along marked separation line (dotted line, 25)
3 Cut spot welds out of outer corner pillar paneling (1) (arrows).
4 Grind outer corner pillar paneling bottom section down to bare metal on both sides in marked area (18) and coat with zinc dust paint.
5 Fit outer corner pillar paneling bottom section, align and clamp.
