AR60.80-W-1100D | Remove/install cab tilting cylinder | 20.7.98 |
MODEL 375.3 with BODY 375.810
MODEL 375.4 with BODY 375.840
MODEL 944 with BODY 944.899
MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with SUPERSTRUCTURE 940.899
W60.80-1004-06
Illustrated on body 940.899
1 Tilting cylinder
2 Screw
3 Screw
4 Plastic rings
5 Suspension on cab mount
6 Socket
7 Bearing journal
8 Split pin
9 Hydraulic line
10 Hydraulic line
11 Washer
12 Washer
| Remove/install | ||
Danger! | Risk of injury to anyone getting jammed and trapped under the tilting cab. | Ensure that no one is within the tilting range of the cab during tilting. Always tilt cab all the way into the end position and secure with safety prop. | |
1 | Tilt cab | ||
| Notes on tilting cab | ||
2 | Attach safety cable to cab | Model 375.3 | |
Model 375.4, 944, 950.5/6, 952.5/6, 953.6, 954.5 | |||
3 | Remove bolt (2) from tilting cylinder (1) | The tilting cylinder should be free of tension. | |
4 | Pivot tilting cylinder to rear and remove plastic rings (4) and bushing (6) | ||
5 | Retract tilting cylinder (1) | Installation: Open filler screw on hand pump and completely extend and retract tilting cylinder. The air in the hydraulic system is bled by pumping back and forth. | |
6 | Mark hydraulic lines (9, 10) | ||
7 | Remove tilting cylinder (1) | ||
8 | Install in the reverse order | ||
9 | Check oil level in hydraulic tilting pump |
Cable set
970 589 00 31 00
Henviste dokumenter
- ah6080n000301a Oplysninger om tipning af førerhus
- ar6080w100004a
- ar6080w100004b
- as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes