S60.30-0032-09
1 | Dropside | 3 | Spacer RH | 5 | Adhesive label | ||
2 | Locut nuts | 4 | Spacer LH |
6 | Bracket |
7 | Electrical wiring harness |
8 | Cable tie |
9 | Grommet |
S60.30-0033-03
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Disassemble/assemble | ||
1 | Remove existing detachable parts | Depending on the equipment variant or the installed body, there may be additional detachable parts. | |
2 | Remove dropside (1) | ||
3 | Remove outer handle on dropside (1) | ||
4 | Remove locks of dropside (1) | ||
5 | Remove model badge | ||
Assembly: Replace model badge. | |||
6 | Remove rear Mercedes star | ||
Assembly: Replace rear Mercedes star. | |||
7 | Remove locut nuts (2) | Assembly: Check locut nuts (2) for damage. | |
Depending on findings | |||
| |||
Replace damaged locut nuts (2). | |||
8 | Remove spacers (3, 4) | Assembly: Replace spacers (3, 4). | |
9 | Remove adhesive label (5) | Assembly: Replace adhesive label (5). | |
10 | Remove grommet (9) at dropside (1) | ||
11 | Remove bracket (6) | ||
12 | Remove electrical wiring harness (7) with grommet (9) | For this purpose, disconnect cable tie (8). | |
Assembly: Replace cable tie (8). | |||
13 | Assemble in the reverse order | ||
14 | Calibrate backup camera | ||
| Connect/disconnect diagnostic unit | ||
| Check | ||
15 | Check functions of dropside (1) | ||
16 | Perform function check of reversing camera |
Henviste dokumenter
- ad0000s200006p
- ar6030s0006p
- ar6030s0010p
- ar6030s0016p
- ar6030s0020p
- ar8800s0022p
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.