Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | Model 447, 448 with code W65, model 447, 448 with code W68 | |||
BE60.00-N-1001-01J | Gap dimensions | Engine hood to headlamp | Dimension "AA" | mm | 2,5 (1,5) | 2,5 (1,5) |
Engine hood to fender at side | Dimension "AB" | mm | 4 (0,8) | 4 (0,8) | ||
Engine hood to fender at top | Dimension "AC" | mm | 3,5 (0,8) | 3,5 (0,8) | ||
Engine hood to radiator trim | Dimension "AD" | mm | 5 (1) | 5 (1) | ||
For picture, see | ||||||
Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | Model 447, 448 with code W65, model 447, 448 with code W68 | |||
BE60.00-N-1002-01J | Gap dimensions | Fender to headlamp | Dimension "BA" | mm | 0,3 (0,25) | 0,3 (0,25) |
Fender to bumper | Dimension "BB" | mm | 2 (1) | 2 (1) | ||
Fender to A-pillar | Dimension "BC" | mm | 2,6 (1) | 2,6 (1) | ||
Fender to front door | Dimension "BD" | mm | 4,5 (0,8) | 4,5 (0,8) | ||
Fender to longitudinal member | Dimension "BE" | mm | 4,5 (1,2) | 4,5 (1,2) | ||
For picture, see | ||||||
Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | Model 447, 448 with code W65, model 447, 448 with code W68 | |||
BE60.00-N-1004-01J | Gap dimensions | Front door to longitudinal member | Dimension "DA" | mm | 6 (+2/-1) | 6 (+2/-1) |
Front door to sidewall | Dimension "DB" | mm | 4 (1) | 4 (1) | ||
Front door to sliding door | Dimension "DC" | mm | 4 (+1,2/-0,8) | 4 (+1,2/-0,8) | ||
Front door to A-pillar | Dimension "DD" | mm | 4,5 (+1,5/-1) | 4,5 (+1,5/-1) | ||
Front door to fuel filler door | Dimension "DE" | mm | 4 (1) | 4 (1) | ||
For picture, see | ||||||
Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | Model 447, 448 with code W65, model 447, 448 with code W68 | |||
BE60.00-N-1006-01J | Gap dimensions | Sliding door to roof frame | Dimension "FA" | mm | 4,5 (1,4) | 4,5 (1,4) |
Sliding door to sidewall | Dimension "FB" | mm | 4 (+1,2/-0,8) | 4 (+1,2/-0,8) | ||
Glass pane in sliding door, all-round | Dimension "FC" | mm | 3 | 3 | ||
For picture, see | ||||||
Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | Model 447, 448 with code W65, model 447, 448 with code W68 | |||
BE60.00-N-1007-01J | Gap dimensions | Sidewall to liftgate | Dimension "GA" | mm | - | 4,5 (+1,5/-0,2) |
Sidewall to cover on guide rail of sliding door | Dimension "GB" | mm | 1,5 (0,8) | 1,5 (0,8) | ||
Sidewall to fuel filler door | Dimension "GC" | mm | 4,5 (1) | 4,5 (1) | ||
Glass pane in sidewall at front, all-round | Dimension "GD" | mm | 3 | 3 | ||
Sidewall to taillamp | Dimension "GE" | mm | 1,2 (0,5) | 1,2 (0,5) | ||
Glass pane in sidewall at rear, all-round | Dimension "GF" | mm | 3 | 3 | ||
For picture, see | ||||||
Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | Model 447, 448 with code W65, model 447, 448 with code W68 | |||
BE60.00-N-1008-01J | Gap dimensions | Rear window in liftgate, all-round | Dimension "HA" | mm | - | 4 (1) |
Folding rear window in liftgate, all-round | Dimension "HB" | mm | - | 4 (1) | ||
Liftgate to taillamp | Dimension "HC" | mm | - | 4,5 (1) | ||
Liftgate to bumper at side | Dimension "HD" | mm | - | 4 (1) | ||
Liftgate to bumper at bottom | Dimension "HE" | mm | - | 6 (1,5) | ||
Liftgate to roof frame | Dimension "HF" | mm | - | 5,5 (1) | ||
For picture, see | - | |||||
Gap dimensions |
Number | Designation | Model 447, 448 except code W65, W68 | Model 447, 448 with code W65, model 447, 448 with code W68 | |||
BE60.00-N-1009-01J | Gap dimensions | Left rear-end door to right rear-end door | Dimension "IA" | mm | 6 (1) | - |
Rear-end door to bumper at side | Dimension "IB" | mm | 4,5 (1) | - | ||
Rear-end door to bumper at bottom | Dimension "IC" | mm | 6 (1,5) | - | ||
Rear-end door to taillamp | Dimension "ID" | mm | 6,4 (1) | - | ||
Rear-end door to cover over taillamp | Dimension "IE" | mm | 6,4 (1) | - | ||
Rear-end door to roof frame | Dimension "IF" | mm | 7 (1,5) | - | ||
Rear window in rear-end door, all-round | Dimension "IG" | mm | 4 (1) | - | ||
For picture, see | - | |||||
129 589 03 21 00
Feeler gauge
Adjust hoods, doors and trunk lids as shown in the drawings. The gap should not run wedge-shaped or be too narrow at points. Deviations from parallel gap should be max. 0.5 mm over the entire length.
If the inside clearance of the gap is too large or too small, the movable body parts must be centered accordingly.
The reference measurements apply only for repair work on bodies damaged in accidents.
1 | Adjust gap dimensions with feeler gauge, adjust if required. |
S60.00-4548-09
S60.00-4549-09
S60.00-4550-12
S60.00-4551-12
S60.00-4552-12