ar5421d0014ts

Programming of control units

Type ar · emne 54.21 · version 0100 · 2018-05-30

Gælder for: Model 907, 910

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.21 Styreenheder / moduler — Serie 907 · Serie 910

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.15 netværk/multifunktion › 25.15.20 Indkodning/parameterindstilling — Serie 907 · Serie 910

AR54.21-D-0014TS

Programming of control units

27.04.2018

Model

907, 910

Notes on programming control units

AH54.21-P-0001-03Z

Program using flash support file (support through User Help Desk)

1

Connect vehicle diagnosis system, start XENTRY Diagnostics (XD) and select vehicle model.

AD00.00-D-2000-06TS


Sufficient power supply to the vehicle on-board electrical system must be ensured throughout the entire work procedure.
Otherwise any undervoltage that occurs may damage the control units.

If the power supply of the on-board electrical system provided by the on-board electrical system battery is insufficient,

connect a charger.


AR54.10-D-1127TS

2

Program corresponding control unit.

See process description in XD "INFO information system".

3

Perform redocumentation in Vehicle Documentation (VeDoc) in VeDoc screen.

If the control unit was successfully programmed.

4

Perform SCN coding for the respective control unit.

If required, refer to XD.

AR54.21-D-0015TS

5

Perform teach-in processes.

If required, refer to XD.

6

Read out and delete fault memory.

7

Disconnect diagnostic system.

AD00.00-D-2000-06TS

Henviste dokumenter