D54.10-1205-09
Shown on model 907 with code SB2 (Comfort front passenger seat) |
1 | Additional battery | 6 | Screw | |
2 | Nut | 7 | Bracket | |
3 | Ground cable | 8 | Vent hose | |
4 | Nut | 9 | Seat base cover | |
5 | Positive line |
Danger | Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC. | No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers. | |
Topical note | Notes on battery | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1.1 | Remove front passenger seat. | Model 907, 910 with code S04 (Front passenger seat (standard seat)), model 907, 910 with code SL1 (Front passenger seat) | |
1.2 | Move front passenger seat to uppermost and foremost position. | Model 907, 910 with code SB2 (Comfort front passenger seat), model 907, 910 with code SF2 (Electrically adjustable front passenger seat) | |
1.3 | Fold up front passenger bench seat. | Model 907, 910 (except 910.0) with code S23 (Two-seater front passenger seat) | |
2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
3 | Release seat base cover (9) and remove from working area. | ||
4 | Loosen nut (2). | Nut, battery clamp to negative pole/positive pole of on-board electrical system battery/auxiliary battery | |
5 | Disconnect ground line (3) from auxiliary battery (1) and remove from working area. | ||
6 | Fold up positive pole cover. | ||
7 | Release nut (4). | Nut, battery clamp to negative pole/positive pole of on-board electrical system battery/auxiliary battery | |
8 | Disconnect positive line (5) from auxiliary battery (1) and remove from working area. | ||
9 | Remove bolt (6) and remove holder (7). | ||
10 | Detach vent hose (8) from auxiliary battery (1). | Installation: | |
11 | Remove auxiliary battery (1) from seat base. | ||
12 | Install in the reverse order. |
Henviste dokumenter
- ah5410p000101a Oplysninger om batterier
- ah5410p000101a
- ah6800n000101s Oplysninger om udførelse af reparationsarbejde i kabinen
- ar9110d1000ts
- ar9110d1035ts
- as5410z000101a Brand-/eksplosionsfare på grund af kortslutning og udsivende knaldgas. Forbrændingsfare/fare for personskade ved ætsning af øjne, hud og sliminder på grund af batterielektrolyt/-tåge, kortslutning og lysbuepåvirkning. Fare for