17B10 | Exhaust gas temperature sensor placed after the diesel oxidation catalyst |
B49.20-A009-06
| Remove/install | ||
Warning | Risk of burn injuries and scalding when working on AdBlue(R) lines and the component parts attached to them. Risk of injury to skin and eyes when handling AdBlue(R). Risk of poisoning caused by swallowing AdBlue(R) | Pour AdBlue® only into suitable containers. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Notes on self-locking nuts and bolts | ||
1 | Turn off ignition | ||
2 | Disconnect the electric connector and detach the electric wire | ||
3 | Remove the exhaust gas temperature sensor placed after the diesel oxidation catalyst (17B10) | Installation: Lubricate the thread of the exhaust gas temperature sensor placed after the diesel oxidation catalyst (17B10) | |
Exhaust gas temperature sensor after the diesel oxidation catalytic converter | |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
4 | Install in reverse order |
Henviste dokumenter
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande
- as4920z000201a Fare for forbrænding og skoldning ved arbejde på AdBlue(R)-rør og dermed forbundne komponenter. Fare for personskade på hud og øjne ved håndtering af AdBlue(R). Fare for forgiftning ved indtagelse af AdBlue(R)