AR49.10-T-7170BA | Removing/installing the exhaust flex pipe | 12.6.01 |
ENGINE 457.944 in MODEL NMB613.358 /388
T49.10-0014-11
Shown on model 613.358 with rear axle 745.997
1 Exhaust flex pipe
2 Exhaust pipe
3 Exhaust clamp
T49.10-0028-06
Shown on model 613.358 with rear axle 746.217
4 Bolt
9 Exhaust flange
10 Exhaust flex pipe
Modification notes
| Removing/installing | ||
Danger! | Risk of injury to skin and eyes from handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
| Notes on self-locking nuts and bolts | All models | |
1 | Remove interior flap above engine | ||
2.1 | Open maintenance flap at right rear | Only for rear axle 746.217 | |
3.1 | Remove heat shield of exhaust system | Only for rear axle 746.217 | |
4.1 | Loosen exhaust pipe clamps (3) | Only for rear axle 745.997 | |
4.2 | Disconnect exhaust flange (9) | Only for rear axle 746.217 | |
Do this by unscrewing bolts (4) and counterholding the associated nuts. Ensure that the exhaust ring in the exhaust flange (9) is not damaged. | |||
Installation: Check the condition of the exhaust ring and replace if necessary. | |||
5.1 | Slacken exhaust clamp (3) for exhaust flex pipe (1) on main silencer | Only for rear axle 746.217 | |
6 | Remove exhaust flex pipe (1) | If necessary: | |
Remove exhaust pipe (2) on flap fitting | |||
7 | Install in reverse order |
Henviste dokumenter
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ar4900t100001ba
- ar4910t718001ba
- ar8840t110003ba
- as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande