ar4910t718001ba

Removing/installing exhaust pipe at engine brake flap connection

Type ar · emne 49.10 · version 0200 · 2005-07-12

Gælder for: ENGINE 457.944 in MODEL NMB613.358 /388

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 49 Udstødningssystem, udstødningsrensning › 49.10 Udstødningsrør, katalysator, lyddæmper — Serie 613 (modeller 358, 388)

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.41 manifold/rør/lyddæmper/udstødningsslange — Serie 613 (modeller 358, 388)

Gælder også for motorer/gearkasser: 457 944

AR49.10-T-7180-01BA

Removing/installing exhaust pipe at engine brake flap connection

Danger!

Risk of injury to skin and eyes from handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Modification notes

27.8.04

Change of location of the exhaust in connection with rear axle 746.217

Removing/installing exhaust pipe at engine brake flap connection

T49.10-0015-12

1.1 Remove heat shield over the front muffler.

Only required for rear axle 746.217.

1.2 Loosen bracket (2) on exhaust pipe (1).

Only required for rear axle 745.997.

2 Loosen exhaust pipe clamps (3).

3 Remove exhaust pipe (1).

4 Install in reverse sequence.

Shown on model 613.358 with rear axle 745.997

Henviste dokumenter