ar4720t1070aa

Remove, install fuel full-flow filter

Type ar · emne 47.20 · version 0101 · 2005-07-12

Gælder for: ENGINE 457.942 in MODEL 671.015 /020 /021 /030 /042 /332 /333

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 47 Brændstofsystem, energiforsyning drivline › 47.20 Brændstofpumpe, filter — Serie 671 (modeller 015, 020, 021, 030, 042, 332, 333)

EinPAS 16 Brændstof-/energiforsyning motor › 16.10 Brændstofforsyning › 16.10.41 filter/vandudskiller — Serie 671 (modeller 015, 020, 021, 030, 042, 332, 333)

Gælder også for motorer/gearkasser: 457 942

AR47.20-T-1070AA

Remove, install fuel full-flow filter

12.7.01

ENGINE 457.942 in MODEL 671.015 /020 /021 /030 /042 /332 /333

Remove, install fuel full-flow filter

T47.20-0021-01

1 Fuel full-flow filter

2 Fuel pump feed line

3 Engine housing feed line

Remove, Install

1

Open rear flap

Danger!

Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel.

No fire, sparks, naked flames or smoking.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Before installing, clean all sealing surfaces. Install new sealing rings at banjo bolts. Seal openings of fuel lines with a plug after disconnecting.

2

Shut off fuel feed

Close shutoff cock. If not shutoff cock is fitted, it is then necessary to ensure that no fuel can flow out.

3

Drain fuel filter housing

If no drain cock is fitted to the fuel filter housing: Detach return flow line at filter housing and allow fuel to run through a hose into a suitable vessel.

4

Detach fuel pump feed line (2) from fuel full-flow filter (1)

The feed line of the fuel pump is marked green.

*BA47.25-N-1004-01H

5

Detach engine housing feed line (3) from fuel full-flow filter (1)

The feed line of the engine housing is marked yellow.

*BA47.25-N-1004-01H

6

Detach return flow line from fuel full-flow filter (1)

7

Remove fuel filter element

Installation: Check fuel filter element and replace if necessary.

Replace fuel filter

AP47.20-T-0780BB

8

Detach fuel full-flow filter (1) from mounting plate

*BA47.25-N-1005-01H

9

Install in the reverse order

10

Bleed fuel system

Bleeding fuel system

AP47.00-T-1720-01BB

Inspect

Danger!

Risk of accident as vehicle may start off by itself with the engine running. Risk of injury as working around the engine during start-up or while running may result in contusions and burns

Secure vehicle to prevent it from moving off by itself.
Wear closed and tight-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

11

Start engine and inspect fuel system for leaks

If the engine does not start within 30 s,

wait 1 min. and repeat attempt at starting.

12

Switch off engine

13

Close tailgate

Fuel pipes/hoses

Number

Designation

Engine 457.9

BA47.25-N-1004-01H

Banjo bolt, fuel line to fuel filter housing

NM

50

BA47.25-N-1005-01H

Bolt, fuel filter housing to bracket

NM

25

Henviste dokumenter