ar4710w7000b

Remove/install fuel level sensor

Type ar · emne 47.10 · version 0200 · 2009-07-08

Gælder for: MODEL 374, 375, 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5, 957

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 47 Brændstofsystem, energiforsyning drivline › 47.10 Brændstoftank — Serie 374 · Serie 375 · Serie 940 · Serie 942 · Serie 943 · Serie 944 · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 957

EinPAS 16 Brændstof-/energiforsyning motor › 16.10 Brændstofforsyning › 16.10.12 Sensor/kontakt/ledningssæt — Serie 374 · Serie 375 · Serie 940 · Serie 942 · Serie 943 · Serie 944 · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 957

AR47.10-W-7000B

Remove/install fuel level sensor

17.6.09

MODEL 374, 375, 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5, 957

Remove/install fuel level sensor

W47.10-1036-11

Shown on model 950.6 with auxiliary heating

1 Fuel line (return flow)

2 Fuel line (feed)

3 Vent line

4 Securing clamp

5 Electrical connector

6 Fuel line (auxiliary heater)

B22 Fuel fill level sensor

Remove/install fuel level sensor

W47.10-1035-06

Illustrated on model 950.6

7 Measuring lever

B22 Fuel fill level sensor

Modification notes

3.4.09

Work procedure completely revised

Remove/install

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel

No fire, sparks, open flames or smoking.
Only pour fuels into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Switch off ignition

2.1

Disconnect electrical connector (5) on fuel fill level sensor (B22)

For model 374, 375.3/4, 950.5/6, 952.5/6, 953.6, 954.5, 957

2.2

Remove both electrical lines on fuel fill level sensor (B22)

On model 375.1

3

Remove securing clamp (4)

Only for model 374, 375.3/4, 950.5/6, 952.5/6, 953.6, 954.5, 957

4

Remove fuel lines (1, 2) as well as the vent line (3) from fuel fill level sensor (B22)

Mark fuel lines (1, 2) and catch escaping fuel in a suitable safety container.

Installation: Observe identification of fuel lines (1, 2).

5

Remove fuel line (6)

Only on vehicles with auxiliary heater.

6

Unlock fuel fill level sensor (B22) and pull out of the fuel tank

To unlock, turn the fuel fill level sensor (B22) counterclockwise.

Pull out fuel fill level sensor (B22) upwards very carefully. Otherwise, the measuring lever (7) consisting of thin wire and the measuring electronics connected can be damaged..

Installation: Replace sealing ring and carefully install fuel fill level sensor (B22) in the fuel tank.

Fuel fill level sensor modified

BT47.10-W-0008-01A

7

Install in the reverse order

Henviste dokumenter