Remove/install fuel tank · ar4710w4100b · Mercedes-Benz WIS

AR47.10-W-4100B

Remove/install fuel tank

20.3.12

MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958

W47.10-1005-06

Shown on model 944 with auxiliary heating

1 Fuel line (return flow)

2 Fuel line (feed)

3 Fuel line (auxiliary heater)

4 Vent line

5 Securing clamp

6 Connector

7 Fuel tank

8 Tensioning straps

B22 Fuel fill level sensor

Modification notes

20.3.12

Value changed: nut, tensioning strap to LH additional fuel tank

Model 958.2/4

Model 958.0

*BA47.10-N-1002-01C

 	Remove/install
Danger!	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel	No fire, sparks, open flames or smoking. Only pour fuels into suitable and appropriately marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
1	Switch off ignition
2	Disconnect electrical connectors for side marker lamps
3	Remove side paneling
4	Open the cap.
5	Drain off fuel from fuel tank (7)	Collect fuel in a suitable safety container.
6.1	Disconnect plug (6) on fuel fill level sensor (B22)	For model 374, 375.3/4, 930, 932, 933, 934, 940, 942, 943, 944, 950.5/6, 952.5/6, 953.6, 954.5, 957, 958
6.2	Remove both electrical lines on fuel fill level sensor (B22)	On model 375.1
7	Remove securing clamp (5)	Only for model 374, 375.3/4, 930, 932, 933, 934, 940, 942, 943, 944, 950.5/6, 952.5/6, 953.6, 954.5, 957
8	Detach fuel lines (1, 2) as well as the vent line (4)	 Mark fuel lines (1, 2) and catch escaping fuel in a suitable safety container.
		 Installation: Observe identification of fuel lines (1, 2).
9	Disconnect fuel line (3)	 Only on vehicles with auxiliary heater.
10	Unscrew nuts on the tensioning straps (8)	 Installation: Ensure that chafe protection straps are correctly positioned at the fuel tank brackets and at the tensioning straps (8).
			*BA47.10-N-1001-01C
			*BA47.10-N-1002-01C
11	Fold up tensioning straps (8) and remove fuel tank (7) from the fuel tank consoles
12	Remove fuel fill level sensor (B22)	 Only if fuel tank (7) is replaced.
		Model 958	AR47.10-W-7000A
		Model 374, 375, 940, 942, 943, 944, 950.5/6, 952.5/6, 953.6, 954.5, 957	AR47.10-W-7000B
		Model 930, 932, 933, 934	AR47.10-W-7000C
13	Install in the reverse order

 Fuel tank

Number	Designation		Model 374.5/6, 375.3/4, 940, 942, 943, 944, 950, 952, 953, 954, 957	Model 375.1, 970, 972, 974, 975, 976	Model 930, 932, 933, 934


BA47.10-N-1001-01C	Nut, tensioning strap on fuel tank on the right	Nm	45	33	45
BA47.10-N-1002-01C	Nut, tensioning strap on the additional fuel tank on the left	Nm	33	-	33

 Fuel tank

Number	Designation		Model 958.2/4	Model 958.0


BA47.10-N-1001-01C	Nut, tensioning strap on fuel tank on the right	Nm	20	20
BA47.10-N-1002-01C	Nut, tensioning strap on the additional fuel tank on the left	Nm	33	-

Henviste dokumenter

ar4710w7000a
ar4710w7000b
ar4710w7000c Af-, påmontering af føler brændstofindikator
as4700z000101a Fare for eksplosion ved tænding, fare for forgiftning ved indånding og indtagelse af brændstof samt fare for hud- og øjenskader ved kontakt med brændstof