T47.10-0012-11
Illustrated on model 671.042
1 Screw
2 Cover
3 Electrical line
4 Fuel level sensor
5 Fuel tank
T47.10-0013-11
Illustrated on model 671.042
5 Fuel tank
6 Screw/bolt
7 Bracket
8 Screw/bolt
9 Fuel line
| Remove/install | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
1 | Interrupt voltage supply by operating the battery disconnect switch | See Operator's Manual | |
2 | Remove screw/bolt (1) | ||
3 | Take off cover (2) | ||
4 | Detach electric cables (3) from fuel level sensor (4) | Mark connections for the electrical line (3) on the fuel level sensor (4) beforehand. | |
5 | Suction off fuel from the fuel tank (5) | Collect fuel in a safety container. | |
Fuel pump for pumping from supply tank, gasoline / diesel gotis://D_47_02.0 | |||
6 | Raise vehicle | ||
7 | Remove fuel lines (9) from fuel tank (5) | Mark connections for fuel lines (9) on the fuel tank (5). | |
8 | Shim fuel tank (5) | And secure with a suitable vehicle jack to prevent it dropping down and toppling. | |
Engine support device, engine hoist | |||
9 | Remove screw/bolts (6) | ||
10 | Remove screw/bolts (8) | ||
11 | Remove bracket (7) | Installation: Ensure correct positioning of the anti-chafe straps between the fuel tank (5) and the bracket (7). | |
12 | Remove fuel tank (5) | Installation: Ensure correct positioning of the anti-chafe straps above the fuel tank (5). | |
13.1 | Attach underfloor protection on fuel tank (5) | Only if the fuel tank (5) is replaced. | |
14 | Install in the reverse order |
Henviste dokumenter
- ar0060t1000aa
- as4700z000101a Fare for eksplosion ved tænding, fare for forgiftning ved indånding og indtagelse af brændstof samt fare for hud- og øjenskader ved kontakt med brændstof