T47.10-0012-11
Illustrated on model 671.042
1 Screw
2 Cover
3 Electrical line
4 Fuel level sensor
5 Fuel tank
T47.10-0013-11
Illustrated on model 671.042
5 Fuel tank
6 Screw/bolt
7 Bracket
8 Screw/bolt
9 Fuel line
| Remove/install | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
1 | Interrupt voltage supply by operating the battery disconnect switch | See Operator's Manual | |
2 | Remove screw/bolt (1) | ||
3 | Take off cover (2) | ||
4 | Detach electric cables (3) from fuel level sensor (4) | Mark connections for the electrical line (3) on the fuel level sensor (4) beforehand. | |
5 | Suction off fuel from the fuel tank (5) | Collect fuel in a safety container. | |
Fuel pump for pumping from supply tank, gasoline / diesel gotis://D_47_02.0 | |||
6 | Raise vehicle | ||
7 | Remove fuel lines (9) from fuel tank (5) | Mark connections for fuel lines (9) on the fuel tank (5). | |
8 | Shim fuel tank (5) | And secure with a suitable vehicle jack to prevent it dropping down and toppling. | |
Engine support device, engine hoist | |||
9 | Remove screw/bolts (6) | ||
10 | Remove screw/bolts (8) | ||
11 | Remove bracket (7) | Installation: Ensure correct positioning of the anti-chafe straps between the fuel tank (5) and the bracket (7). | |
12 | Remove fuel tank (5) | Installation: Ensure correct positioning of the anti-chafe straps above the fuel tank (5). | |
13.1 | Attach underfloor protection on fuel tank (5) | Only if the fuel tank (5) is replaced. | |
14 | Install in the reverse order |
Referenced documents
- ar0060t1000aa Lift/jack up vehicle
- as4700z000101a Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.