1 | Heat shield |
2 | Boot |
3 | Jam nut |
4 | Clip |
5 | Clip |
S46.40-4506-06
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
| Remove/install | ||
1 | Remove and lower front axle carrier | ||
Do not remove transverse control arm from steering knuckles and do not remove stabilizer bar link rods. There must be adequate space for removing the boot (2). | |||
2 | Remove ball socket | ||
3 | Detach heat shield (1) | Only when removing the right boot (2). | |
To do so, open front bayonet locks of heat shield (1) and lift up heat shield (1) slightly. | |||
4 | Unscrew locknut (3) | ||
5 | Open clamps (4, 5) | Installation: Replace clamp (4), check clamp (5); replace if necessary. | |
6 | Remove boot (2) | ||
| Check | ||
7 | Check boot (2), replace if necessary | ||
8 | Install in the reverse order |
Henviste dokumenter
- ar3310s0001c
- ar4640s7242c
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører