ar4610d0200a

Remove/install clock spring contact

Type ar · emne 46.10 · version 0104 · 2011-10-18

Gælder for: MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (SA5) Driver airbag

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 46 Styretøj › 46.10 Rat, kapperør, styrespindel, ratlås — Serie 901 (modeller 0**, 3**, 4**) · Serie 902 (modeller 0**, 3**, 4**) · Serie 903 (modeller 0**, 3**, 4**) · Serie 904 (modeller 0**, 3**, 4**)

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.15 netværk/multifunktion › 25.15.18 kontakt/kontaktgruppe/betjeningsfelt — Serie 901 (modeller 0**, 3**, 4**) · Serie 902 (modeller 0**, 3**, 4**) · Serie 903 (modeller 0**, 3**, 4**) · Serie 904 (modeller 0**, 3**, 4**)

AR46.10-D-0200A

Remove/install clock spring contact

17.10.11

MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (SA5) Driver airbag

Remove/install clock spring contact

D46.10-0010-05

R5 Clock spring contact

X125 Airbag clock spring contact connector

Remove/install

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag unit with deployment face up, do not subject to temperatures above 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

1

Remove steering wheel

AR46.10-D-0100B

2

Remove knee bolster

AR68.10-D-3512-01A

3

Disconnect connector for airbag clock spring contact (X125)

4

Unscrew the bolts (arrows) until the clock spring contact (R5) can be removed

Do not unscrew bolts fully. The bolts act at the same time as an anti-twist guard and assembly aid.

5

Carefully take clock spring contact (R5) off steering column tube

Do not twist clock spring contact (R5) and do not disassemble. If clock spring contact is twisted (R5) see:

Set the clock spring contact to center position

AR46.10-D-0200-01A

6

Install in the reverse order

Henviste dokumenter